|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB80NF10 STP80NF10 N-channel 100V - 0.012 - 80A - TO-220 / D2PAK Low gate charge STripFETTM II Power MOSFET General features Type STP80NF10 STB80NF10 VDSS 100V 100V RDS(on) <0.015 <0.015 ID(1) 80A 80A 3 Exceptional dv/dt capability 100% Avalanche tested Application oriented characterization TO-220 1 2 3 1 DPAK Description This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements. Internal schematic diagram Applications Switching application Order codes Part number STP80NF10 STB80NF10T4 Marking P80NF10@ B80NF10@ Package TO-220 DPAK Packaging Tube Tape & reel January 2007 Rev 16 1/14 www.st.com 14 Contents STP80NF10 - STB80NF10 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ................................................ 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 STP80NF10 - STB80NF10 Electrical ratings 1 Electrical ratings Table 1. Symbol VDS VGS ID(1) ID (1) IDM (2) Absolute maximum ratings Parameter Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Value 100 20 80 80 320 300 2 7 350 -55 to 175 Unit V V A A A W W/C V/ns mJ C PTOT dv/dt (3) EAS(4) Tstg Tj Peak diode recovery voltage slope Single pulse avalanche energy Storage temperature Operating junction temperature 1. Limited by package 2. Pulse width limited by safe operating area 3. ISD < 80A, di/dt < 300A/s, VDD= 80 % V(BR)DSS 4. Starting Tj = 25C, ID = 80A, VDD = 50V Table 2. Symbol Rthj-case Rthj-amb Tl Thermal resistance Parameter Thermal resistance junction-case Max Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose Value 0.5 62.5 300 Unit C/W C/W C 3/14 Electrical characteristics STP80NF10 - STB80NF10 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250A, VGS = 0 VDS = Max rating VDS = Max rating @125C VGS = 20V VDS = VGS, ID = 250A VGS = 10V, ID = 40A 2 3 0.012 Min. 100 1 10 100 4 0.015 Typ. Max. Unit V A A nA V Table 4. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =25V , ID =40 A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 50 5500 700 175 135 23 51.3 182 Max. Unit S pF pF pF nC nC nC VDD = 50V, ID = 80A, VGS = 10V 1. Pulsed: pulse duration = 300 s, duty cycle 1.5 % 4/14 STP80NF10 - STB80NF10 Table 5. Symbol td(on) tr td(off) tf Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off-delay time Fall time Test conditions VDD = 50V, ID= 40A, RG = 4.7, VGS=10V (see Figure 14) Min. Typ. 26 80 116 60 Max. Unit ns ns ns ns Table 6. Symbol ISD ISDM(1) VSD (2) Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 80A, VGS = 0 ISD=80A, VDD = 50V di/dt = 100A/s,Tj=150C 106 450 8.5 Test conditions Min Typ. Max 80 320 1.3 Unit A A V ns nC A trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed:pulse duration=300s, duty cycle 1.5% 5/14 Electrical characteristics STP80NF10 - STB80NF10 2.1 Figure 1. Electrical characteristics (curves) Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/14 STP80NF10 - STB80NF10 Figure 7. Gate charge vs gate-source voltage Figure 8. Electrical characteristics Capacitance variations Figure 9. Normalized gate threshold voltage vs temperature Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/14 Test circuit STP80NF10 - STB80NF10 3 Test circuit Figure 13. Gate charge test circuit Figure 12. Switching times test circuit for resistive load Figure 14. Test circuit for inductive load Figure 15. Unclamped inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform 8/14 STP80NF10 - STB80NF10 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/14 Package mechanical data STP80NF10 - STB80NF10 TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 10/14 STP80NF10 - STB80NF10 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 11/14 Packaging mechanical data STP80NF10 - STB80NF10 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 12/14 STP80NF10 - STB80NF10 Revision history 6 Revision history Table 7. Date 04-Nov-2003 13-Dec-2004 16-Dec-2004 27-Jan-2005 22-Feb-2005 28-Feb-2005 01-Mar-2005 06-Apr-2006 25-Jan-2007 Revision history Revision 8 9 10 11 12 13 14 15 16 Changes New datasheet according to PCN DSG-TRA/03/382 DPAK inserted @ inserted in table 2 for TO-220 marking New value in table 3 Id value changed New value in table 3 Vgs value changed The document has been reformatted Typo mistake on page 1 (order codes) 13/14 STP80NF10 - STB80NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 |
Price & Availability of STP80NF10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |